OPA1622: Shut down output

Abigail Leonardi

Part Number: OPA1622

Tool/software:

Hi,

I'm hoping to continue the conversation from this previous thread here: https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1421389/opa1622-en-shutdown-not-working

Does your team have recommendations of how to completely shut down the output of the device?

Thank you!

5 months ago

0 Chris Featherstone 5 months ago

TI__Mastermind 23965 points

Hi Abigail,

Unfortunately there is no other way to completely shutdown the output stage. This is controlled internally to the device vis the enable pin. The output stage is shutdown in this mode saving power.

Best Regards,

Chris Featherstone

+1 Chris Featherstone 5 months ago in reply to Chris Featherstone

TI__Mastermind 23965 points

Hi Abigail,

Thinking about this further. This may not even be caused by the device. There are going to be feedback resistors around the amplifier itself and this is a path for the signal to conduct. I will respond on the other thread as well.

Best Regards,

Chris Featherstone

0 Abigail Leonardi 5 months ago in reply to Chris Featherstone

TI__Intellectual 2710 points

Thanks Chris!

Audio

Audio forum

OPA1622: Shut down output