TLV320AIC3253: Schematic design

?? ?

Part Number: TLV320AIC3253
Other Parts Discussed in Thread: TAS2552, LM48310

Tool/software:

TLV320AIC3253 When in MAST mode, is the MCU host available without MCLK? How to design it if it is paired with LM48310 or TAS2552?

5 months ago

0 Jeff McPherson 5 months ago

TI__Mastermind 43685 points

Hi,

To design with LM48310 or TAS2552 (or any analog input amplifier) couple the Line Outputs from the codec to the analog inputs of the amp with a 1st order low pass filter fc = 20kHz.

In Master Mode the source clock must be present for the codec to operate correctly. BCLK can be a substitute if MCLK is not available.

Best regards,
Jeff McPherson

0 ?? ? 5 months ago in reply to Jeff McPherson

Prodigy 10 points

Hi
Can TLV320AIC3253 be used as a master to output BCLK? Because Soc Host I2S only has Slave mode.

0 Jeff McPherson 5 months ago in reply to ?? ?

TI__Mastermind 43685 points

Hi,

AIC3253 can act as Master to output BCLK but it requires a source clock (like MCLK). See this app note for recommended configurations when dealing with master/slave modes: https://www.ti.com/lit/an/slaa469a/slaa469a.pdf?ts=1735919390258&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTLV320AIC3253

Best regards,
Jeff McPherson

Audio

Audio forum

TLV320AIC3253: Schematic design