TS3A226AE: TS3A226AE

Jacob Voss

Part Number: TS3A226AE

Tool/software:

I HAVE CONNECTED THE TS3A226AE LIKE THE ATTACHED IMAGE, AND I AM USING THE EVAL BOARD TO DO THIS. EVERYTHING WORKS HOWEVER WHEN I RECORD MYSELF IN AN AUDIO RECORDER USING THE MIC, IF I HAVE A VIDEO PLAYING IT PUTS THE VIDEO AUDIO IN MY RECORDING. WHEN I PLAY THE RECORDING BACK I HEAR BOTH MY VOICE AND A VIDEO AUDIO IN THE PLAYBACK. HOW IS AUDIO GETTING ONTO MY MIC INPUT?

6 months ago

0 Nir Gilgur 6 months ago

TI__Mastermind 20605 points

Hello Jacob,

The TS3A226AE is an audio switch that passes whatever signal is being inputted. The added audio is coming somewhere from your system. This is not the fault of the mux.

Thanks,

Nir

0 Jacob Voss 6 months ago in reply to Nir Gilgur

Prodigy 70 points

I am using a standard intel 10 pin HD audio header protocol. I figure this is a primary use case for this device other than putting my own codec on a board

0 Nir Gilgur 6 months ago in reply to Jacob Voss

TI__Mastermind 20605 points

Hello Jacob,

Can you record and test your system without the mux?

See if you get the same result.

Thanks,

Nir

Audio

Audio forum

TS3A226AE: TS3A226AE