So... I just got my TAS3204 Eval Board

Josh Reiner

Other Parts Discussed in Thread: TAS3202, PCM3070

I just unpacked it and set it up. Only to find out today that it's discontinued. Love it when that happens. Life's cruel jokes...

If only TI made something else suitable.

over 12 years ago

0 Josh Reiner over 12 years ago

Prodigy 40 points

It looks like the TAS3202 might work for my application. My fear is that the TAS3x0x will dry up completely, though.

Is this an emotional support forum, also? I may be taking this too personally. What do the experienced engineers do when they're in the middle of a project and this happens? Start drinking?

0 Lester Longley over 12 years ago in reply to Josh Reiner

TI__Intellectual 1530 points

Josh - all TAS3x0x devices are being moved to NRND status. You will still be able to purchase the EVMs as well as sample- and production-quantities of the devices. However, TI's support for these devices, EVMs, tools, and documentation, will be very limited. In addition, no silicon revisions or tool bug-fix releases should be expected. Regards, Lester

0 Josh Reiner over 12 years ago in reply to Lester Longley

Prodigy 40 points

Thanks again, Lester.

This is bad news. Does the suggested replacement, PCM3070, use a similar DSP architecture (48-Bit Data Path With 76-Bit Accumulator)?

TAS3x0x were perfect for my application.

0 Don Dapkus over 12 years ago in reply to Josh Reiner

TI__Guru**** 189399 points

Josh,

The PCM3070 only has a 32-bit data path...

-d2

0 Don Dapkus over 12 years ago in reply to Don Dapkus

TI__Guru**** 189399 points

Josh,

LOL, I just read your comment about emotional support.

As Lester said, these parts are still valid, it's just that support for things like the GUI, etc are being de-emphasized.

Hmmm, not sure if that will make you feel better or worse...

-d2

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Audio

Audio forum

So... I just got my TAS3204 Eval Board