TPA2016D2: Single-ended output

Ryu Yamashita

Part Number: TPA2016D2

Tool/software:

Hi team,

Can this device be used with a single-ended output?
If so, is it sufficient to add a ferrite bead or LC filter to the output?
Also, please advise on how to handle the OUT pin if it can be used.

Best Regards,
Ryu.

5 months ago

0 Ivan Salazar 5 months ago

TI__Guru** 113875 points

Hi Ryu,

Using single-ended output is not recommended.

Best regards,
-Ivan Salazar
Applications Engineer

0 Ryu Yamashita 5 months ago in reply to Ivan Salazar

Genius 4355 points

Hi Ivan,

Thank you for your reply.
Understood.
Do you have any similar amplifiers in your lineup that support single-ended output?

Best Regards,
Ryu.

0 Ivan Salazar 5 months ago in reply to Ryu Yamashita

TI__Guru** 113875 points

Hi Ryu,

I think in general you may look for Class-AB amplifiers to drive single-ended output. If looking for very low power you may consider headphone amps from TPA61xxA2 family or DRV6xx line driver amps.

Please share more details of the application:

Only intend to drive single-ended output?
Load impedance.
Supply voltage range.
Number of channels.
Output power range.

Best regards,
-Ivan Salazar
Applications Engineer

Audio

Audio forum

TPA2016D2: Single-ended output