Part Number: PCMD3180
Hello TI support,
we're using the PCMD3180. Please have a look on the attached circuit diagramm.
Thank you in advance.
Regards,
Dusan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: PCMD3180
Hello TI support,
we're using the PCMD3180. Please have a look on the attached circuit diagramm.
Thank you in advance.
Regards,
Dusan
Hi Dusan,
IOVDD needs to be connected to a voltage supply - either 1.8V or 3.3V.
SCL and SDA should be pulled up to this IOVDD supply.
Since the devices share a TDM bus, ensure they are assigned to different output channel slots, and each is configured to transmit Hi-Z on unused cycles.

Best,
Garret