TSC2013-Q1: 4-wire Resistive touch

CLEATUS WESLEY

Prodigy 40 points

Part Number: TSC2013-Q1

Hi!

I am designing an HMI using a 4-wire resistive touch panel.

Will TSC2013QPWRQ1 be a suitable part for my requirement?

I have attached the datasheet of the display I'm working on: Updated RK070CU45H-T.pdf

Thanks & Regards,

Cleatus Wesley

3 months ago

0 Daveon Douglas 2 months ago

TI__Mastermind 28510 points

Hi Cleatus,

Its unclear to me whether the panel is resistive touch or capacitive touch. In order for TSC2013 to be compatible the touch-screen must be resistive touch and have the X+/- and Y+/- pins

0 CLEATUS WESLEY 2 months ago in reply to Daveon Douglas

Prodigy 40 points

Hi Daveon!

RTP pinouts has been provided under section 6.3 RTP Pin Interface which can be found on page 12 of data sheet.

0 Daveon Douglas 2 months ago in reply to CLEATUS WESLEY

TI__Mastermind 28510 points

Hi,

Then yes, TSC2013 is compatible.

0 CLEATUS WESLEY 1 month ago in reply to Daveon Douglas

Prodigy 40 points

Hi!

Can you please provide feedback on my schematics?

RTP.pdf

0 Daveon Douglas 1 month ago in reply to CLEATUS WESLEY

TI__Mastermind 28510 points

Hi,

Schematic looks good, follows our typical application diagram well :)

Audio

Audio forum

TSC2013-Q1: 4-wire Resistive touch