Hi,
I am using TAS5717 Audio amplifier in my application. I want to use 3 W speaker and i have option to provide either 5V or 24V to PVDD. Please help me to configure DRC settings for PVDD 5V and 24V.
Regards
Charles
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I am using TAS5717 Audio amplifier in my application. I want to use 3 W speaker and i have option to provide either 5V or 24V to PVDD. Please help me to configure DRC settings for PVDD 5V and 24V.
Regards
Charles
Hi Charles,
I would suggest you to download the TAS5717 GUI, there you can easily configure the threshold of the AGL (This device has an AGL that basically is a more advanced and easy to use DRC!). It will be hard to get 3W from 5V power supply, if that power spec is required, you should use 24V.
Best Regards,
-Diego Meléndez López
Audio Applications Engineer
Hello Charles,
If you are using a 24V power supply, I would recommend starting with a smaller value, perhaps -15dB or so to get an output power around 3W.
Best Regards,
-Diego Meléndez López
Audio Applications Engineer