Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 555 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM4546B, LM4549B, LM4550B EVM and AC'97 versions

Nathaniel Wilson
Intellectual 1990 points
Other Parts Discussed in Thread: LM4546B, LM4550B, LM4549B

Hi Team,

One of my customers, Draeger Medical (bedside hospital patient monitors), has been using a WM9705CSEFL/RV from Wolfson/Cirrus that is now going obsolete. They need AC'97 support so I pointed them to the LM4546B, LM4549B, LM4550B devices. However, those devices only support version 2.1 while the Wolfson/Cirrus part supported AC'97 version 2.2. They are not sure at the moment if that is going to be a problem, but I wanted to see if there were any potential problems with switching to version 2.1 for them?

Also, they are interested in getting an EVM, but I did not see one online. I assume that they don't exist, but wanted to check as well.

Thanks,

Nate