We are using this DAC part in our project.
Our Processor is connected to the DAC using I2C & I2S interfaces and we want to drive output via the 8 ohm Speaker Only .
We have loaded the registers from the Init-script which is given in TI EVM TLV320DAC3120EVM-U . We have disabled the HP registers and increased the DAC volume control register.
All the clocks Mclk (11.2896MHz), Bclk(2.8224MHz), Wclk(44.1KHz) and also DIN are given properly from the Processor to the DAC but not able to receive any output.
Please share if possible the Correct Registers configurations needed to drive the Speaker.