• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 28 subscribers
  • Views 417 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2560EVM: PurePath Console 3 and TAS2560

Andres Segura
Prodigy 10 points
Part Number: TAS2560EVM
Other Parts Discussed in Thread: TAS2560

The data sheet keeps mentioning in several places that PPC3 can be used to configure the TAS2560 but the APP only has an Audio Mode Selection and no where to be found an easy way to change register values in a graphical way. Sure the register map does show the register values but this is very crude, and setting different configurations doesn't created code that you can run later. Am I missing something?

  • 0
    TI__Guru* 95285 points
    Hi Andres,

    Welcome to e2e.
    There is also the Device Control panel on TAS2560 App. Using this panel you can configure some more things in the device.
    In addition on Register Map you can set values manually by double-click on the value column or double click on a specific bit. If you have already configured the device you can save the setup as a ppc3 file that you can later use on the same App.

    Best regards,
    -Ivan Salazar
    Texas Instruments