Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 28 subscribers
  • Views 607 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM48821: Single-ended Input Configuration

Sadanori Kato
Guru 36530 points
Part Number: LM48821

Hi,

Could you please confirm whether it is possible to apply the single-ended input configuration to LM48821 as below ?
If yes, does the voltage gain become -6dB in the case of the single-ended input ?

Best regards,
Kato

  • 0
    TI__Guru** 102045 points
    Hi Kato-san,

    You can use single-ended input configuration, there should be no problem.
    You can adjust the gain/volume through I2C control.
    Using single-ended or differential input configuration does not affect LM48821 gain. However single-ended input would need double the signal amplitude as it would need for differential input, in order to obtain the same output level. You can increase LM48821 gain to compensate this.

    Best regards,
    -Ivan Salazar
    Audio Applications Engineer - Low Power Audio & Actuators
  • 0 in reply to Ivan Salazar
    Guru 36530 points

    Hi Ivan-san,

    Thank you for your response.
    I understood.

    Best regards,
    Kato