This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5753MDEVM: Use external I2C master with PurePath Console Motherboard rev G?

Part Number: TAS5753MDEVM
Other Parts Discussed in Thread: TAS5753MD,

I'm trying to develop firmware for controlling the TAS5753MD via I2C.  I have the evaluation board, which is connected to the PurePath Console Motherboard -- rev G (I think).  AIP006G is written on the motherboard's silkscreen.  I can communicate with the device using the PPC3 software, but not with an external I2C master (TotalPhase Aardvark).  Is there anything I can do to make this work?