Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 727 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA2028D1: AGC Enable/Disable

Jordan Radice
Prodigy 130 points
Part Number: TPA2028D1

Hello,

My name is Jordan and I have a customer using the TPA2028D1, but aren't sure how to enable/disable the automatic gain control (AGC). After looking in the datasheet, I'm not sure how this would be done, any thoughts? It looks like at hex address 0x07, you can control the gain, but not sure how it would be enabled/disabled.

Thank you.

Best regards,

Jordan Radice