Tool/software: Linux
Hi Ti,
I am using AIC3268 in our custom board.
There are 3 audio sources:
1. Analog line in signal
2. Digital HDMI audio
3. Digital SDI audio
As I know, there are 3 audio serial interfaces in AIC3268.
Is it possible to clock out the following I2Ss to our main chip?
1. I2S with mixed audio (line in + HDMI +SDI)
2. I2S with HDMI audio
3. I2S with SDI audio
I could mix line in, HDMI, SDI audio in miniDSP and clock out mixed data in ASI1 to our main chip already.
If I want to clock out HDMI audio in ASI2, such as:
HDMI audio->SRC(sample rate converter)->AIC3268 ASI2 in->AIC3268 ASI2 out->main chip audio serial interface.
The BCLK and WCLK of ASI2 both connected with SRC and main chip. The clock mode is master mode. is it OK?
Thanks
BR,
Steven