• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 676 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RC4558: SNR parameter and package

Dongbao Zhou
Expert 4120 points
Part Number: RC4558

hello,

1. Could you let me know the SNR parameter of RC4558? Or how to evaluate the SNR performance?

2. For the second SOIC (8), it should be VSSOP. Could help confirm?

Dongbao 

  • 0
    TI__Guru** 103625 points
    Hi Dongbao,

    SNR is the difference between the output noise voltage and the full-scale output voltage. This difference is measured in dB. So you basically set an input signal to the amp that sets a full-scale signal at the output and set your dB reference to 0, then you AC-couple the inputs to GND in order to measure noise voltage and measure the difference with the reference in dB.
    This document gives some guidelines for several audio performance measurements: www.ti.com/.../sloa068.pdf

    Yes, there is a typo in Device Information table, the second SOIC should be VSSOP-DGK.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators