• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 29 subscribers
  • Views 505 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/LME49724: LME49724 Turn-Off Time and Turn-On Time

Caleb Chen
Prodigy 50 points
Part Number: LME49724
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Hi,

I want to use the ENABLE FUNCTION of LME49724.

I need to know Turn-Off Time and Turn-On Time, which is not written in the datasheet.

Can you tell me this information or update the datasheet so it will be helpful when the customers want to use this function?

Regards,

Caleb

  • 0
    TI__Guru** 102225 points
    Hi Caleb,

    Does a bench test to know the enable/disable time would be fine for you? If yes, I can work on testing one device to obtain this time.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators
  • 0 in reply to Ivan Salazar
    Prodigy 50 points

    Hi Ivan,

    Yes, a bench test is fine to me.

    Please work on this.

    Thanks,

    Caleb

  • 0 in reply to Caleb Chen
    TI__Guru** 102225 points

    Caleb,

    The enable time is as specified in the data sheet:

    Regarding the disable time it might be higher depending on external components, but it should be in the order of hundreds of micro-seconds.

    You should take into account that output load and external components might affect this enable/disable times as there would be some capacitance that would need to charge/discharge.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators