Hi everybody,
I'm implementing a project that include the SRC4392.
Due to pcb space limitation I need to use less components as possible.
I have a doubt about the RX+/RX- (pins 1 to 8) that are not utilized in my project (I'm using only I2S port A,B and AESOUT), can I leave these pins float or i must to connect they to gnd (through capacitors, due to DC bias)?
I can't find related information in the datasheet about this specific aspect.
Many thanks.
Luca
-
Ask a related question
What is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
