Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 519 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5756MDCAEVM: TAS5756MDCAEVM

davker
Prodigy 50 points
Part Number: TAS5756MDCAEVM
Other Parts Discussed in Thread: TAS5756M

I have connected my TAS5756M evaluation board to my laptop and launch Pure Path Console 2 but he never detect the evaluation board. I have changed mu USB cable but no change. What kind of file I am supposed to doawload when I come to the "Add target" meu?

Your quick answer will be apprecated.

Warm regards 

  • 0
    TI__Guru 63350 points
    Davker,

    Alix will get back to you soon.

    Regards,

    -Adam
  • 0
    TI__Genius 9995 points

    Hi Davker,

    Could you please to confirm points bellow:

    1. Is your PPC2 the latested version, if not , please update to the latest and reboot your system, than try again; In addition, could you please try another computer?

    2. What is version of your Purepath mother board, please refer to this : https://e2e.ti.com/support/amplifiers/audio_amplifiers/f/6/t/599436?tisearch=e2e-sitesearch&keymatch=PPC2%20connect ; (Ensure you have install all necessary driver in the link)

    3. Usually the connection process is as bellow, could you please check which is abnormal to you:

    a. Power on EVM board, a blue LED in mother board (near USB connector); 

    b. Connect your USB to motherboard and the blue LED is still on indicating USB is indentifed and locked --- This is a must;

    c. Double click the PPC2 file, then GUI will show: "Connect a target to proceed OR Manually Choose a Target"; please manually choose TAS5756

        target and then OK; --- if you cannot find any

    d. Afterwards, the GUI should indicate "Connect as TAS5754M-56MDCAEVM", just click it.

    If the steps above cannot work, could you please clarify more clearly about your problem? EVM version?

    Best regards,

    Alix