• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 181 views
  • Users 0 members are here
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC33: the registers configuration with MIC3R input

yuanding shi
Prodigy 50 points
Part Number: TLV320AIC33

hello,

I have some troubles when using the chip of tlv320aic33. Audio signal inputs from MIC3R channel，but the ADC  values read through SPI interface are almost the same.  I think It maybe have some errors with the configuration of the registers. What's the right configuration of registers?  thanks. 

 

  • 0
    TI__Guru 57780 points

    Hi, Yuanding,

    The SPI interface of this device is used for control only, so the ADC data will not be sent over it. The audio digital data supported by this device is PCM, with different formats as I²S, L-J, R-J, TDM or DSP only. 

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer