This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5760LD: Asking how to generate the audio playback sound on the AP

Part Number: TAS5760LD

Hi team,
customer uses TAS5760*2 and TAS5753 for stereo, two woofer and center application.
Do you have idea how to use AP or other tool to generate the 4.1 CH source for customer test?


  • Hi Scott,

    AP will not an option. However, it is not the best option in my opinion since the AP usually assumes each channel/slot has the same audio data.

    I think what your customer needs will be a DSP/ARM development board that can provide TDM outputs. Unfortunately, we don't have such a system by ourselves.