For the TAS5630, 5613, 5611....
Are the READY and CLIP output characteristics the same as the SD and OTW characteristics?
That is 26K pull up to 3.3V?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
For the TAS5630, 5613, 5611....
Are the READY and CLIP output characteristics the same as the SD and OTW characteristics?
That is 26K pull up to 3.3V?
Hello Bruce:
READY and CLIP are open drain with a pullup.
I will consult the design document to confirm the value of the pull-up; however, I believe it is the same 26K that you mentioned because the fanout is listed as 30 in the datasheet.
Regards,
Fred
Hello Bruce:
This morning, I reviewed the design documentation and confirmed that the pull-up resistors for CLIP and READY are just like the others on OTW, etc, 26K.
Rgds,
Fred