Hi,
im desperately need your advice. am i doing this right? i just copied this circuit and tried to make it a mono diff input.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
im desperately need your advice. am i doing this right? i just copied this circuit and tried to make it a mono diff input.
Hi Ariel,
Sorry after taking another look at the schematic I noticed you didn't connect the Reset pin. This needs to be pulled to GND DVDD or 3.3V to enable the device.
Justin
im sorry, im confused, pull down? its an active low input. so pulling it will make it activate the reset function all the time thus disabling the device.