Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 300 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RC4558: Output Current Limit Info

Harsh shukla
Prodigy 100 points
Part Number: RC4558

Hi,

Greetings for the Day!

I am not able to not the output current limit of this part inside the datasheet.

Can anyone please provide this information?

Thanks

HHS

  • 0
    TI__Guru** 102035 points
    Hi HHS,

    Perhaps this comment from a previous question could help:
    VOM spec (page4) ensures +/-10V into 2k ohm. That is +/-5mA.
    Typical chart "output swing" (page 6) is 12Vpp at 500 ohms. That is +/-12mA
    Schematic on page 2 shows current limit is set by output resistors.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators