PCM1863: question about the "power limit" of Smart Bass when using Pure Path Console

Carsound Lin

Part Number: PCM1863
Other Parts Discussed in Thread: TAS5782M

Hi There,

We try to set "Smart Bass" by using the tool Pure Path Console with EVM, and we have a problem that the parameter "power limit" seems does not work, Is it necessary to set other parameters?

attached the file we use, would you please check the problem for us, thank you.TAS5782m_I2C_Initialization.rar

over 6 years ago

0 Ravi Patil over 6 years ago

TI__Expert 5645 points

Hi Carsound,

Just to make sure, are you referring to the issue w PCM186x or TAS5782 device?

Best regards,
Ravi

0 Carsound Lin over 6 years ago in reply to Ravi Patil

Prodigy 210 points

Hi Ravi,

Sorry, the issue is about TAS5782, I'll make a new post, could you please delete this post, thanks.

Audio

Audio forum

PCM1863: question about the "power limit" of Smart Bass when using Pure Path Console