This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSC2102: Programming sequence

Other Parts Discussed in Thread: TSC2102, TSC2000


Is programming sequence of the TSC2102 apply the SLAA197?

If yes, it is described that "Tip 2: The initialization sequence shown in Figure 1 is needed ONLY once after each power up or reset." on the app note.

Isn't multiple reset as below allowed?

   POWER UP → Initialize → RESET(All register clear) → Initialize(2nd) → RESET(All register clear) → 初期化(3rd) → …

Best Regards,