DIT4096: DIT4096 S/PDIF adjustment driving

kerr chang

Part Number: DIT4096

Hi Team

Can TI DIT4096 adjustment driving for S/PDIF output by HW or SW ? We have one device ( audio Amp ) connector to DIT4096 and did not have audio output.

I want check this issue is from DIT4096 or device ?

over 5 years ago

0 Steve-Wilson over 5 years ago

TI__Mastermind 30080 points

Kerr chang,

What mode are you using the DIT4096 in? are you using an EVM? if not can you share your device schematic and if using software mode, can you share your configuration?

best regards

-STeve Wilson

0 kerr chang over 5 years ago in reply to Steve-Wilson

Genius 4075 points

Hi Steve

0x01FF00 write 00

0x02FF02 write 02

0x03FFAC write AC

0 Steve-Wilson over 5 years ago in reply to kerr chang

TI__Mastermind 30080 points

Kerr,

It isn't clear to me if you are using and EVM or your own board. Can you comment?

best regards,

-Steve Wilson

0 kerr chang over 5 years ago in reply to Steve-Wilson

Genius 4075 points

Hi Steve

DIT4096 did not have EVM , We test on our pcb. Only this device have this issue.

0 Feng bin Su over 5 years ago in reply to kerr chang

TI__Expert 7860 points

Hi Steve,

Could you kindly provide the comment for it? Not every time there is no sound output for it but there are always audio output when they another SPDIF transceivers.

Please let us know, if you need else more. Thanks.

0 Steve-Wilson over 5 years ago in reply to Feng bin Su

TI__Mastermind 30080 points

Feng,

I'm trying to understand your register configuration... can you explain your formatting?

best regards,

-STeve Wilson

Audio

Audio forum

DIT4096: DIT4096 S/PDIF adjustment driving