Hi!
My customer is designing Audio Power Amp using the TAS5634.
The specifications that the customer wants to set are PVDD 58V, 180W, THD 1%, 8ohm.
But the customer wants to use a speaker that drives 4 ohms. My customers have not yet fixed the output specification of the 4-ohm speakers.
1. Is it ok to use 4 ohms speakers when using the TAS5634 in a BTL configuration?
On the datast, the Min load is 5 ohms when BTL is configured.
2. If a 4 ohm speaker drive is available with a BTL configuration of the TAS5634, max power at 4 ohms THD 1%
Can you check it?
Please check it.
Thank you.
Best Regards.
From Anthony.
