Other Parts Discussed in Thread: TLV320AIC3111
We are using the TLV320AIC3111 to filter and amplify an audio signal that is coming in through the EXT_MIC_IN (J7) and play the filtered signal simultaneously on the HP, speaker and I2S output.
Based on user input, we need to set different filter coefficients, to filter out different kinds of data from the audio stream. We need to do this while the program is running on the board, without the need to disconnect, change the program and reconnect and re download. Is there any way this can be done? Eventually we shall be using an external microcontroller over the I2C which shall control the EVM.
Thanks and Regards,
Souvik.