LMV1012: replacement to MAX4063A

Patrick Chen(TPE System & Application)

Part Number: LMV1012

Hi Sir,

My customer is currently using MAX4063A, we would like to replace it and found that LMV1012 looks similar to it. But I am not familiar with Microphone Preamplifier, could you help check if we have a good solution to replace it?

Many thanks,

Patrick

over 5 years ago

0 Ivan Salazar over 5 years ago

TI__Guru** 101465 points

Hi Patrick,

Do you have a data sheet of the competitor device?

LMV1012 is the kind of pre-amp that is used inside of the electret case. Is that what customer is looking for?

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Patrick Chen(TPE System & Application) over 5 years ago in reply to Ivan Salazar

TI__Expert 3430 points

Hi Ivan,

The spec link as below.

https://datasheets.maximintegrated.com/en/ds/MAX4063.pdf

Thanks.

Patrick

0 Ivan Salazar over 5 years ago in reply to Patrick Chen(TPE System & Application)

TI__Guru** 101465 points

Patrick,

If customer only needs the microphone amplifier portion, then LMV1012 should be OK. There are several op-amps available as well if the package is too small to handle.

Unfortunately there is no direct part-to-part replacement for the mentioned device.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

Audio

Audio forum

LMV1012: replacement to MAX4063A