TAS2562YFPEVM-DC: TAS2562 - sound configuration for an IMX6

Henri PINEAU

Part Number: TAS2562YFPEVM-DC
Other Parts Discussed in Thread: TAS2562, TAS2552

Hello,

I need to replace a TAS2552 with a TAS2562. I succeeded with the TAS2552 but not with the TAS2562.

I work on an IMX6 with a YOCTO distribution. I use the I2C driver (TI sources) and everything seems to be good. Now, i need to interface the TAS2562 with the IMX on an I2S port.

For the TAS2552, I found the right one. You can see in : www.google.com/url

Can I reuse the same driver and adapt for an TAS2562 or is it completely different ?

Thank you.

PINEAU Henri

over 4 years ago

0 Luis Fernando Rodriguez S. over 4 years ago

TI__Guru* 84915 points

Hi, Henri,

Welcome to E2E and thank you for your interest in our products!

Our team will take a look at this and will answer as soon as possible.

Best regards,
Luis Fernando Rodríguez S.

0 Ivan Salazar over 4 years ago

TI__Guru* 95285 points

Hi Henri,

Is this the resource you mention? https://git.ti.com/cgit/tas256xsw-android/tas2562-android-driver/

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Henri PINEAU over 4 years ago in reply to Ivan Salazar

Prodigy 100 points

Hi Ivan,

Thank you for your reply. Yes I mention this ressources https://git.ti.com/cgit/tas256xsw-android/tas2562-android-driver/tree/

I just use the tas2562-regmap.c for the i2c configuration. But I don't know what the others are really for.

I need the driver for the I2S configuration between an IMX and the TAS2562.

Kinds regards

PINEAU Henri

0 Ivan Salazar over 4 years ago in reply to Henri PINEAU

TI__Guru* 95285 points

Henri,

I'm unable to answer driver related questions, please let me communicate your questions to our SW team and get back with further comments.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuator

0 Ivan Salazar over 4 years ago in reply to Henri PINEAU

TI__Guru* 95285 points

Henri,

Some coments from our software team:

TAS2562 driver is available in ti git at https://git.ti.com/cgit/tas256xsw-android/tas2562-stereo-android-driver/log/

It’s a stereo driver, but the file https://git.ti.com/cgit/tas256xsw-android/tas2562-stereo-android-driver/tree/dts.readme can be referred to configure it as mono or stereo.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuator

0 Henri PINEAU over 4 years ago in reply to Ivan Salazar

Prodigy 100 points

Hi,

I succedeed to implement my tas2562. I have one question, The IRQZ is obligatory or not ?

If not, is it possible in the driver to desactivate it ?

Best regards

PINEAU Henri

0 Ivan Salazar over 4 years ago in reply to Henri PINEAU

TI__Guru* 95285 points

Henri,

IRQZ is not obligatory from hardware perspective.

I'll ask software team about driver and provide their comments within the next couple days.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Ivan Salazar over 4 years ago in reply to Ivan Salazar

TI__Guru* 95285 points

Henri,

I'm following up on the driver question with our SW team.

Will provide further comments over this week.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Ivan Salazar over 4 years ago in reply to Henri PINEAU

TI__Guru* 95285 points

Hi Henri,

IRQZ can be ignored both on HW and SW.

For SW the dts file entry must be removed: ti,irq-gpio = <&gpio1 15 0>;

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

Audio

Audio forum

TAS2562YFPEVM-DC: TAS2562 - sound configuration for an IMX6