• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA6140A2: Single-Ended Application

Mark Philip Felipe
Genius 9705 points
Part Number: TPA6140A2

Hi Team, we would like to clarify the single-ended application information on the datasheet. On the pin details INL+ and INL- are suggested to be pinned to ground with 1uF capacitor. However on the application circuit on page 13 it is connected directly to the codec output. 

Thank you in advance.

Regards,

Mark 

  • 0
    TI__Guru* 95175 points

    Hi Mark,

    You can actually use either inverting or non-inverting input for single-ended input connection.
    The difference would be only if the input signal is inverted or not.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators