Hi Audio team,
My customer is considering to use LM4952 as 64ohms headphone amp driver.
Do you have any data with 64ohms load with following condition?
> 12Vdd, 10/20% THD+N
In addition, is it ok to use LM4952 as 64ohms headphone amp?
Regards,
Kai
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Audio team,
My customer is considering to use LM4952 as 64ohms headphone amp driver.
Do you have any data with 64ohms load with following condition?
> 12Vdd, 10/20% THD+N
In addition, is it ok to use LM4952 as 64ohms headphone amp?
Regards,
Kai
Hi Kai
You can use 64 ohm loads, this should not cause issues. You should consider that increased impedance would reduce output power.
Unfortunately there is no data available for 64 ohm loads.
Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators