This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear sir,
We don't need Headphone in our design (use speker only).
So, we plan to remove the jack and coupling capacitor for headphone,Is it no problems?
(This capacitor is Cout(100uF) in Figure 3 of Data sheet )
Regards,
S,Ko
Hi S,
Welcome to e2e.
Your proposed changes are OK. If not using the headphone connection you can remove the output capacitor, just make sure to connect your speaker load in BTL connection.
Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators
Hi Ivan,
Thank you for your reply.
We pay attention to speaker connection.
Best Regards,
S Ko