PCM1808: Affect by system clock

Kuramochi Tadahiko

Guru 28715 points

Part Number: PCM1808

Hi,

My customer considers using PCM1808 and the sampling frequency is 48kHz.

Are any characteristics differences in the case of setting fsclk=2.048MHz or 4.096MHz?

Best Regards,

Kuramochi

over 5 years ago

0 Collin Wells over 5 years ago

TI__Guru 64495 points

Hello,

The PCM1808 supports 256fs, 384fs, and 512fs options, so with a 48kHz sampling rate the main clock input needs to be 12.288MHz - 24.576MHz.

More information can be found in Section 7.3.2 System Clock and Table 1.

0 Kuramochi Tadahiko over 5 years ago in reply to Collin Wells

Guru 28715 points

Collin-san,

Thank you for your support.

Are any characteristics differences in the case of setting fsclk=12.288MHz or 24.576MHz at fs=48kHz?

Best Regards,

Kuramochi

0 Kuramochi Tadahiko over 5 years ago in reply to Kuramochi Tadahiko

Guru 28715 points

Hi Collin-san,

How is the situation?

Best Regards,

Kuramochi

0 Zak Kaye over 5 years ago in reply to Kuramochi Tadahiko

TI__Mastermind 23050 points

Hi Kuramochi-san,

Collin is out for the day so I will answer.

There is no impact to performance using one SCLK vs. the other. You may prefer to use a lower frequency SCLK from an EMI perspective and/or depending on board layout and trace lengths lower frequencies may be preferable, but the PCM1808 performance does not change assuming the clock is clean in both cases!

Best,

Zak

Audio

Audio forum

PCM1808: Affect by system clock