Hi all,
For TAS5558 I want to set up input data for SDIN1 Left justified Timing 24bit. How should I do that?
Datasheet reffers setting on page 65, but only byte 0x0E and bit D3 - D0 for SDOUT, SDIN5 only.
In PurePath application is described register byte 0x0E. Do bites D3 - D0 set data format for DIN1 to DIN5?
How should be the correct describe of byte 0x0E in datasheet?
Thank you very much.
Regards
Vojta Kana
