Hi Team,
The datasheet Figure 20 shows the following at GAIN=0dB.
Could you tell me input voltage (Vrms) in this case?
Best Regards,
Yaita
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, Yaita-san,
Since the amplifier gain is fixed at 0dB. The input voltage on each test is the same than the output voltage.
Please let me know if you have additional questions or comments.
Best regards,
Luis Fernando Rodríguez S.