is it possible to implement a FFT to the TAS3208 device via PurePath Software?
Any ideas are welcome.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
An FFT is not possible to implement on TAS3xxx devices because of the limited memory and MIPS.
In particular the TAS3x processors are limited in the memory to between 700 and 800 DSP Data Registers, (Refer to the front page of the respective TAS3x Datasheet for details). In addition to this, block processing is extremely inefficient on the architecture supports only direct memory addressing.