• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 1079 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] PCM3060: PCM3060 ESD

Natsuki Ohkuma
Prodigy 50 points
Part Number: PCM3060

Dear TI

I would like to know the ESD (MM/HBM/CDM) rating of PCM3060.

A customer of mine is asking for the ESD ratings so that they can protect against harming the part during handling and loading on PCB.  Please advise.

Best regards.
Ohkuma

  • 0
    TI__Guru 62895 points

    Hello Ohkuma,

    I have reviewed our internal databases and found that the PCM3060 was very thoroughly tested for ESD and will meet the following ratings:

    MM:  200V

    HBM:  2000V

    CDM:  1000V

    Note that I have made this thread an FAQ thread since it is a common question and will likely come up again.