TAS2505EVM: How to get AC(alternating current) output by TAS2505evm

hui yuan

Part Number: TAS2505EVM
Other Parts Discussed in Thread: TAS2505

We want use TAS 2505 to drive a LRA actutor , the drive waveform like below shown, it is AC signal ,how to realize it and we want get AC(alternating current) output. thanks !

over 3 years ago

0 Raphael Xu over 3 years ago

TI__Intellectual 940 points

Hi Yuan,

Regarding the waveform,is it PCM file?

Regards

Raphael

0 Luis Fernando Rodriguez S. over 3 years ago in reply to Raphael Xu

TI__Guru* 84915 points

Hi, Yuan,

Could you provide more details about this application?

Why are you considering the TAS2505 device over the DRV26xx family devices?

https://e2e.ti.com/support/motor-drivers/f/38/t/917353

Best regards,
Luis Fernando Rodríguez S.

0 Luis Fernando Rodriguez S. over 3 years ago in reply to Luis Fernando Rodriguez S.

TI__Guru* 84915 points

Hi, Yuan,

I'm closing this e2e thread due to inactivity. However, feel free to post the additional information we requested for additional support.

Best regards,
Luis Fernando Rodríguez S.

Audio

Audio forum

TAS2505EVM: How to get AC(alternating current) output by TAS2505evm