PCM1789-Q1: TDM support?

Lee, Sam

Part Number: PCM1789-Q1
Other Parts Discussed in Thread: PCM1690, PCM1681

Hi team,

A customer wants to check if PCM1789-Q1 can support TDM8 48kHz. If it's not supported, can you recommend automotive Audio DAC to support TDM8 48kHz?

Thanks,

Best Regards,

Sam Lee

over 3 years ago

0 Paul_Frost over 3 years ago

TI__Guru 52663 points

The Sam,

The only automotive qual'd audio DAC devices that we have that support TDM are the PCM1690 and the PCM1681. These are both 8-channel devices.

Thanks,

paul

0 Lee, Sam over 3 years ago in reply to Paul_Frost

TI__Expert 4965 points

Hi Paul,

Thank you for your reply. Would you please check again if PCM1789-Q1 can be used?

One channel out of TDM8 format will be used with below clock, and the other channel is don’t care in PCM1789-Q1. In that case, is it possible to use PCM1789-Q1 utilizing the left channel of DSP format?

Thanks,

Sam Lee

0 Paul_Frost over 3 years ago in reply to Lee, Sam

TI__Guru 52663 points

Hi Sam,

It is possible that device will successfully latch the data with this configuration, and we have seen some customers attempt this in the past. I will test this in the lab.

Thanks,

Paul

0 Lee, Sam over 3 years ago in reply to Paul_Frost

TI__Expert 4965 points

Hi Paul,

Thank you for your answer. Yes, please let me know the test result.

Thanks,

Sam Lee

0 Paul_Frost over 3 years ago in reply to Lee, Sam

TI__Guru 52663 points

Hi Sam,

I found that the device accepted TDM as expected. It should work fine.

Audio

Audio forum

PCM1789-Q1: TDM support?