• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 380 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM1864-Q1: I2C ready to access

Atsushi Hirai
Expert 5250 points

Part Number: PCM1864-Q1

Hi team,

How long wait time is required for starting I2C communication after DVDD=AVDD=IOVDD=3.3V stable?

The datasheet has POR timing chart as below. Is it depend on the external clock frequency or so?

Please advise.

  • 0
    TI__Mastermind 23050 points

    Hi Hirai-san,

    Unfortunately we don't have a specified startup time. I would suggest a 20 milliseconds delay after the supplies settle before trying to write any registers to give the device some time to enter its default state.

    Best,

    Zak