• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPA2025D1: Do we have internal pull-up resistor on TPA2025 EN pin? If we have, what is the pull-up resistor value?

TPA2025D1: Leakage Curent of the en pin

Peter Wei
Expert 3030 points
Part Number: TPA2025D1

Hi Team,

One of my customer is using TPA2025D1, they reported, if they weak pull up the ENABLE pin, saying ~10Mohms, there are some middle voltage was observed on the pin. As previous feedback from BU, there is no internal pull-up pull down resistor inside of the device, so it could be the leakage. But in our datasheet, we do not have the spec on the leakage current on EN pin. Can you share the data, to see how big the resistor can be.

Best Regards,

Peter Wei