Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 231 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2557: moving from tas2555

Nicholas Carley
Expert 8825 points
Part Number: TAS2557
Other Parts Discussed in Thread: TAS2555,

Due to availability, my customer is interested in moving from the TAS2555 to the TAS2557. From a hardware perspective, they grounded the IN_P and IN_M lines on the TAS2555, but the TAS2557 says to NC this pins. Can we leave these pins as GND or do we need to change layout to float them?