Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 167 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM4204: Power requirements

Hideki Hayashi1
Expert 7570 points
Part Number: PCM4204

Hi team,

Let me ask questions about power requirements.

1. Is there any requirements of power-on/power-off sequence of Vcc and Vdd? If I understand correctly, RESET OPERATION section describes initialization sequence, but this doesn't require specific sequence for power supply.

2. Is there any requirements of rise time/fall time of Vcc and Vdd?

Best regards,

Hideki

  • +1
    TI__Mastermind 23050 points

    Hi Hideki-san,

    There are not any strict power on/off timing requirements for PCM4204. I would just recommend holding the device in reset until the power rails have settled and all clocks are supplied so that the device initializes properly.

    Best,

    Zak