Hi Shenghao
I follow Raphael's register setting,but run Execute is fail,would you know what go in on? Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Shenghao
I follow Raphael's register setting,but run Execute is fail,would you know what go in on? Thanks.
Hello,
This format of commands is not intended for PPC3. To use the Direct I2C on PPC3, the commands should look like the following:
Best Regards,
Justin Beigel
Command format is wrong. Pls ask Raphael for help.
Hi Kevin,
You should use the command below:
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 14 00
w 9a 00 00
w 9a 7f 00
w 9a 00 00
w 9a 14 00
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 04 c2
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 06 49
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 3e 00
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 03 22
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 48 b0
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 40 7f
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 49 84
w 98 00 00
w 98 7f 00
w 98 00 00
w 98 40 3f
Regards
Raphael