• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 285 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC3268: Mono PCM Mode

Jae Ung Sim
Prodigy 40 points
Part Number: TLV320AIC3268

Hi, TI Expert,

If you look at the TLV320AIC3268 datasheet there is Mono PCM Mode.
If you look at the timing diagram of mono PCM Mode, there is no distinction between the right and left channels.

How do I transfer stereo data in this Mono PCM Mode?

Thanks for your help.

  • 0
    TI__Guru 62085 points

    Hello,

    As the naming convention suggests, "Mono PCM" mode should only be selected as the configuration for the audio serial interface (ASI) bus if only one channel of data is intended to be transmitted on the interface.

    For standard Stereo audio configurations we recommend using a standard I2S, LJ, RJ or TDM style format.