This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to stop PWM signal individually for TAS5508C?

Intellectual 895 points

Replies: 2

Views: 412

Hi Engineers,

I would like to stop PWM output channels which is unused individually for TAS5508C.

How do i get it?

Regards, 

2 Replies

  • Hello,

    Section 3.3.1 in the data manual below for TAS5508C can guide you through the individual channel control using reg 0x05-0x0C.

     

    Regards,

    Damian Lewis

  • In reply to Damian Lewis:

    This is not what I expect.
    I would like to stop individual PWM regardless of RESET, MUTE, BE_ERROR condition.
    Please re-consider.

    Regards,

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.