This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TAS5751MEVM
Wondering if it is possible to hook up 2x TAS5751EVM to get a stereo 2-way crossover? So have L/R Main & L/R Tweeter. Is a single PurePath Motherboard Console able to configure/pass digital audio to 2 EVMs?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Shawn Zheng:
Using PBTL for woofer & BTL for tweeter sounds acceptable. Will try and let you know if I have any trouble setting up.
Can you explain more about the I2C slave address for using 2 devices? Right now we would only be using EVMs to setup initial prototype of stereo 2-way system. Are we to use a new address for the 2nd EVM or is that just during final system integration?
In reply to Michael Swanson12:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.