TAS5534 Max Volume of Loudness Compensation Parameters

Sadanori Kato

Hi,

We would like to confirm whether "Max Volume" that is described on page 32 of data sheet is the master volume,
show "DRC Positioning in TAS5534 Processing Flow" as below.
If the master volume is not correct, could you please explain it to us?

Best Regards,
Kato

over 10 years ago

0 Sadanori Kato over 10 years ago

Guru 36490 points

Hi,

We have not obtained your reply yet, are looking forward to receiving your favorable reply.

Best Regards,
Kato

0 Don Dapkus over 10 years ago in reply to Sadanori Kato

TI__Guru**** 189399 points

Hi, Kato-san,

Sorry for the delay... We will look into this for you soon.

-d2

0 Sadanori Kato over 10 years ago in reply to Don Dapkus

Guru 36490 points

Hi Don-san,

Thank you for your reply.
We are looking forward to receiving your favorable reply.

Best Regards,
Kato

0 Sadanori Kato over 10 years ago in reply to Sadanori Kato

Guru 36490 points

Hi Don-san,

Do you have any updates for this issue?
We are looking forward to your reply.

Best Regards,
Kato

0 Sadanori Kato over 10 years ago in reply to Sadanori Kato

Guru 36490 points

Hi Don-san,

We are looking forward to your reply for this issue.

Best Regards,
Kato

0 Sadanori Kato over 10 years ago in reply to Sadanori Kato

Guru 36490 points

Hi,

Do you have any updates for this issue?
Since our customer is in trouble, could you please tell us about it as soon as possible?

Best Regards,
Kato

0 Tuan over 9 years ago

TI__Mastermind 33420 points

Hello Kato-san:

The "Max Volume" number is derived from the Master Volume and Individual Channel Volume setting multiply with the modulation index limit setting. It is not the same as the Master Volume. Hope this explanation helps.

Best regards,

Tuan

0 Sadanori Kato over 9 years ago in reply to Tuan

Guru 36490 points

Hi Tuan-san,

Thank you for explaining.
I understood.

Best Regards,
Kato

Audio

Audio forum

TAS5534 Max Volume of Loudness Compensation Parameters